Diversified Biotech

Diversified Biotech offers a variety of gel related products:

- Synergel™: Improving Agarose Gel Performance
- Fluorescent Ruler Kit
- Identi-Kit
- Autoradiograhy Ruler Set
- Gel Handler™
- Gel Drying Frames
- RadTape™ and RadTape Plus™
- Flow Mesh™
- Agarmate™
- Fluoro-Sheet
- Glow Writer

Features/Benefits:

Please see below for more information:

Specifications:

SYNERGEL™ : IMPROVING GEL PERFORMANCE

Superior Sieving - Better sieving than agarose, 1 gram Synergel = 2 gram agarose.

High Resolution - Synergel / Agarose gels exhibit improved spatial separation and tighter banding for DNA fragments of 50-2000bp.

No Background Fluorescence - The superior optical clarity permits high quality photo-documentation.

Increased Load Capacity - Accommodates greater quantities of DNA reducing band tailing and smearing.

Easy To Use - Mix, boil and pour!

(A) 1.5% Synergel and 0.7% agarose (Seakem LE)        (B) 4% NuSieve Agarose (FMC)

FLUORESCENT RULER KIT

No more guesswork - Accurately measures the mobility of electrophoretic markers and ethidium bromide-DNA complexes during electrophoresis.

Thin - At 7mm wide they require only a single lane of an agarose gel.

Fluorescent ink markings are sharp and photograph well under UV light (300nm & 350nm).

Rulers are made of flexible, UV-clear plastic so only the fluorescent markings will show under UV light.

IDENTI-KIT : Non-radioactive numbers, letters and arrows for high quality images on X-ray film

Fast - Directly orient [32]-P-nucleic acid hybridized filters with film, while at the same time automatically organizing the multiple filters required to find the desired insert.

Designed specifically for use with X-Ray film.

Unique shading procedure is sharp enough so markings will not over expose, although exposure is complete in about 30 mins.

Great for autoradiography of agarose and polyacrylamide gels to provide unambiguous lane identification, along with superior presentation of data.

AUTORADIOGRAPHY RULER SET: Phosphorescent, Non-Radioactive Metric Rulers for Radiographs

The Autoradiography Ruler Set (ARS) is an orientation and measurement device that exposes metric ruler markings directly onto X-ray film.

Ideal - Utilizes a specially formulated phosphorescent dye compound and a unique emission filter which serves as an ideal non-radioactive substitute for ink markings.

Easy - Make easy electrophoretic mobility calculations.

Re-usable - The phosphorescent emission of each ruler can be regenerated indefinitely and can be reused any number of times.

High Resolution - Produces a high resolution image that is unaffected by intensifying screens or pre-flashed film.

GEL HANDLER : Flexible UV Transparent Sheets for Handling Gels, Visualizing and Photo Documentation

Ideally sized 8.5" x 11" (216mm x 279mm).

Thin sheet that easily slides beneath a gel.

Flexibility of the sheet eliminates air bubbles.

Protects the transilluminator from cuts and scratches.

Polyolefin composition allows acid washing and autoclaving without a chemical reaction.

Optical densities for the 5mil thick sheets at  254 and 300nm emission wavelengths of the transilluminator are 0.14 and 0.04 respectively.

GEL DRYING FRAMES

Allow Researchers to quickly and easily dry gels between two sheets of cellophane without the use of expensive heat/vacuum gel dryers.

24 x 24cm frames allow for drying of larger format gels.

14 x 14cm frames allowing for drying of mini gels and other smaller formats.

Complete Kits

* Each kit includes 2 open frames, 2 solid back plates, 12 side clips and 50 sheets of pre-cut cellophane

Cellophane

RADTAPE™ and RADTAPE PLUS*™ : An Easy Way to Identify Autograms - Radiological & Chemilluminescence

Versatile - Phosphorescent, non-radioactive adhesive labels that may be cut to the specific size and shape needed for each individual membrane, dried gel or microarray.

Fast and Easy - marking system is great for documentation and archiving and ideal for chemilluminescence and radiological autography.

Use and ordinary pen to mark the label using the investigator's own codes and symbols.

Simply peel the custom label from its backing and affix it to the membrane, gel or microarray.

Permanent - exposes a negative image of the markings directly onto autorad, thus producing a permanent record of the experiment.

FLOW MESH™ : A Permeable Support Mesh for Gels and Membranes

Protects filters and gels from tearing, bending or folding.

1/3mm thick polypropylene mesh with 1mm strand spacings and approximately 70% void column for rapid equilibration with liquids.

Supports gels and filters during incubation with nucleic acid probes, antibody probes, equilibrium buffers, stain and destain solutions, etc.

Serves as permeable carrier and stacking spacer for one or more membranes and gels during incubations and other procedures.

Improves the uniformity of hybridization and binding assays.

AGARMATE™

AgarMate is an inert polysaccharide which when combined with agar, forms an improved gel for cell culture and general bacteriological use.  

The special properties of AgarMate reduce the inherent turbidity of conventional nutrient agar gels, thereby facilitating visualization of opalescent colonies, growth inhibition zones and lytic plaques.  Molecular association between the AgarMate galactomannan and agar polymers produces a strengthened and more elastic gel and simultaneously reduces the undesirable tendency of agar gels to release free water as the gel cools and contracts during storage.   

AgarMate has been tested in bacteriological and cell culture research and diagnostic applications by the Difco and Sigma laboratories. A wide range of gram negative and positive bacteria, bacteriophage, DNA transformed gels and eucaryotic cells (including plant cultures) have been propagated on AgarMate containing gelled media.

FLUORO-SHEET

Reduces the risk of damaging expensive filters

Works with DNA or RNA gels stained with Ethidium Bromide or SYBR Green

Sharp fluorescent markings

Intended for large or small gels

The most sensitive and expensive part of the UV transilluminator is the filter glass; Filter glass is necessary to block out the visible light and UV light of undesirable wavelengths.  The surface of the filter is vulnerable to scratches and nicks. 

The Fluoro-Sheet, a UV transmittable sheet can provide reliable protection against such damages.  The Fluoro-Sheet provides two dimensional fluorescent scales in three sizes, 20 x 19 cm, 15 x 14 cm and 10 x 9 cm.  This improved versatility provides researchers a better way to assess the distance of DNA migrated in the gel, since the rate of DNA migration is not always the same on each side of the gel.

The Fluoro-Sheet is designed for UV tranilluminators of medium (300 nm) and long (365 nm) wavelengths.  NOTE: It is NOT transmittable to UV of short wavelength (260 nm)

GLOW WRITER™ - Fine-Point Phosphorescent Marking Pen for Laboratory Autography

Glow Writer is a phosphorescent pen for marking chemiluminescent and isotope-labeled substrates for X-ray film autography.  The unique marker delivers a phosphor-containing ink through a fine point porous nib.  

Before exposure to X-ray film, the phosphorescent writing is excited by room light.  A phosphor ink having an optimum concentration of phosphor and a relatively short afterglow half-life (approx. 2-3 mins) has been selected so that upon exposure to X-ray film, autographic exposures of almost any duration will be easily readable on the film.  The fine point nib is easily replaceable if it dries out.

Tough-Tags arechemically inert polyester labels that strongly adhere to all plastics and other materials. Tough-Tags are pre-cut, peel-off labels which accept any marking instrument and are perfectly sized to fit microcentrifuge tubes and other containers in the laboratory.
Tubes with Tough-Tags wrapped around them will still slide easily in and out of rotors without binding because the labels are thin and the adhesive does not migrate from behind the label even after boiling and autoclaving.

Features/Benefits:

Tough-Tags are temperature resistant from 121°C to -40°C. These labels will withstand autoclaving, boiling water baths, freezer temperatures, organic solvents, caustic agents and other challenges without peeling, cracking or falling off. For best adhesion, it is recommended that siliconized surfaces be avoided

Specifications:

ON A SHEET FOR LASER PRINTING

ON A ROLL

 (X) = Add Letter for Colour: B=Blue,  C=Clear,  G=Green,  R=Red,  W=White,  Y=Yellow

Please refer to the following for more information.

Features/Benefits:

Please refer to the following for more information.

Specifications:

PIPETTOR GUIDE

The pipettor Guide features a plastic slide guide, above the microplate, to help align your Pipettor with the microplate wells.  The sliding guide is clearly marked with column letters for fast and easy orientation.  The Guide is compatible with multi-channel pipettor.  Use with or without the 30º angled stand.  The pipettor guide is a great tool to reduce eyestrain and tedious pipetting work.

PIPETTOR CLAMP

This unique product keeps pipettors at your fingertips.  It secures to tabletops and benches with a few turns of a large plastic screw.  It moves easily from one location to another, wherever you need it in the lab.

PIPETTOR TRI-CLAMP

This innovative product clamps down securely to tabletops or benches and holds most major brands of pipettors.  The Tri-Clamp provides the flexibility of housing expensive pipettors practically anywhere in the lab.  A screw on each end of the product provides a safe hold with just a few easy turns.

PIPETTOR STAND

The Pipettor Stand are made of a durable ABS plastic that guarantee last.  The stand have 6 slots that are compatible with most major brands of pipettors.  The stand is available in a variety of colours including Green, Red and Blue.

MANUAL PIPET RACKS

Manual Pipet Racks hold 0.1ml to 25ml pipets or cans. They feature 4 angled compartments and the overall dimensions are 3.5" x 11.5" x 16".  Includes optional attachments to hold pipet bulbs and pipet fillers on both sides of the rack.  Unique "windows" on the ABS version makes the viewing of enclosed pipets easier.

MAGNETIZED MANUAL PIPET RACK

The new magnetized version of the pipet storage rack features two handy attachments for holding pipet bullbs, pipet fillers and pipet pumps.  With circular magnets molded onto all four corners of each side, mounting these racks onto fume hoods, file cabinets, refrigerators, etc. is an easy process.  Constructed of a durable ABS plastic, these racks not only look better, but will also hold up better than acrylic.  It measures 290 x 85 x 410mm.

SMART BOTTLE™ - 1 Bottle, 2 Orientations

Two Stable Orientations - Unique angled geometry permits both diagonally and vertical access/pipetting in/out of bottle for optimal aseptic technique

Low Profile - 3 tier stacking saves shelf and bench space

Just 2 inches from neck to bottom - Sterile tip of micropipettor reaches bottom of bottle without barrel even entering the bottle

Easy Magnetic Stirring - Make up to 0.1 litre of stock solutions (makes molarity math easy) ... twice the limit of 50cc clinical tubes

Low Center of Gravity - Provides great stability against tipping

FDA Certified Virgin Polypropylene - Non-Cytotoxic and fully autoclavable bottle and cap

Easy to write on or label

Universal - For all biological uses including mixing/storing cell culture media and nuclease-free applications.  Polyproyplene also resists all caustics and organic solvents for chemical applications.

Sterilized by Gamma-irradiation - Free of all contaminants including ethylene oxide